Surya Enginering

We are putting forth the best nature of Rebar Coupler to our clients.

We are Manufacturing Rebar Coupler with Good quality raw materials.

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

High cycle fatigue test

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SE58
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: Rebar Coupler

Taper Rebar Coupler : Taper Rebar Couplers are generally long length,having good capacity for cramp.
Good tensile strength
Proper thread Engagement
Good life
High accuracy
We are providing sales & services in all over pan india Mumbai, goa, rajasthan, kolkata, karnataka, kerla, chennai, tamil nadu, surat, ahmedabad, vadodara, vapi, nashik, pune, nagpur, kolhapur, satara, coimbatore, bangalore, mangalore, vijaywada, hyderabad, aurangabad, hariyana, ludhiana

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

High cycle fatigue test

 

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SE3
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: Rebar Coupler with 25 pieces

Rebar Coupler/ Bar break Rebar Coupler:

We are manufcaturing Type II Cold produced coupler. Chilly fashion joining framework favorable circumstances: High rigidity Robust Highly protection from erosion GO NO GO Quality match.

Rebar Coupler Application : Building Construction/ Dam construction/NH Highway Construction

Material - EN 8 D

% of C= 0.40 to 0.45

Standard for Rebar Coupler:

IS 1786/ BS8110/ACI 318

Tesnile sterngth-700 MPA during tensile pull up test

Standard sizes of Rebar Coupler:

16 mm Rebar Coupler

2o mm Rebar Coupler

25 mm Rebar Coupler

32mm Rebar Coupler

36mm Rebar Coupler

40mm Rebar Coupler

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Cyclic Tensile Test

 

The mechanical splice is reliable when it can withstand 100 cycles of stress variation. The cycle is from 5 percent to 90 percent of fy (where fy = 550 N/mm2) when tested by standard details. It is to be done without loss of static tensile strength capacity when compared with a similar specimen. The static tensile strength capacity of the sample is determined by testing it statically. It undergoes numerous stress cycles for failure of the required procedure. At the end of the test, the spliced sample shall remain intact.

Additional Information:

• Item Code: SE32
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: Rebar Coupler

We are offering a wide array of Roll Thread Rebar Coupler in the market. These products are designed as per customer's specifications.

Features:
• High quality
• Fine finish
• Long lasting

We have Rebar Coupler with 16 mm,20 mm,25 mm,32 mm,40 mm.

Material-EN 8 D

Tensile strength-650 MPA

We are providing sales & services in all over pan india Mumbai, goa, rajasthan, rajkot, jaipur, surat, ahmedabad, vadodara, vapi, nashik, pune, kolhapur, satara, coimbatore, bangalore, mangalore, hyderabad, aurangabad, kolkata, karnataka, chennai, tamil nadu, kerla, delhi kota, indore kota

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

Additional Information:

• Item Code: SE18
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: Roll Thread Rebar Coupler with pack of 25 pieces

A rebar coupler is a mechanical device used in construction to connect two pieces of reinforcing steel bars (rebar) together. These couplers are typically used when the length of rebar needed for a construction project exceeds the standard available lengths or when there is a need to join two rebars for other reasons such as seismic considerations or to simplify construction.
Here are some key points about rebar couplers in construction:
Purpose: Rebar couplers are used to create a continuous, unbroken length of reinforcement within a concrete structure. This is important for structural integrity and strength, as it ensures that there are no weak points in the rebar where it is spliced together.
Types: There are various types of rebar couplers, including threaded couplers, tapered thread couplers, and mechanical couplers. The choice of coupler depends on the project's requirements and local building codes.
Installation: Rebar couplers are installed by threading or mechanically connecting the ends of the two rebar pieces together. This process is typically done using special equipment or tools to ensure a secure connection.
Advantages:
Strength: Properly installed couplers can provide a connection as strong as the rebar itself.Reduced Labor: Using couplers can reduce the amount of labor required for manually tying rebar, saving time and money.Consistency: Couplers provide consistent and reliable connections, reducing the risk of human error in tying rebar.Applications: Rebar couplers are commonly used in various construction projects, including high-rise buildings, bridges, dams, and other infrastructure projects where reinforced concrete is used.
Codes and Standards: The use of rebar couplers is subject to local building codes and standards. It's essential to follow these regulations to ensure the safety and structural integrity of the project.
Quality Control: Proper quality control and inspection are critical when using rebar couplers. Inspections should ensure that the couplers are correctly installed, and the rebar is properly aligned and threaded.
This rebar couplers are essential components in modern construction, allowing for the efficient and reliable connection of reinforcing steel bars. Their use can enhance the structural integrity of concrete structures while also improving construction efficiency. However, it's crucial to adhere to local building codes and industry standards when using rebar couplers to ensure safety and compliance.



Surya Engineering is one of the leading Manufacturer and Exporter of Rebar Coupler Bar Cap Forging Machine PVC Block etc We offer these products at most reasonable rates In their development process we assure that only top notch basic material is used by our professionals along with ultra modern tools and machinery Together with this our offered facility of customization has earned us a huge number of satisfied customers

Low cycle fatigue test

 

There are two types of fatigue tests namely low cycle fatigue test and high cycle fatigue test. All reinforcement couplers should be able to satisfy the requirement for low cycle fatigue tests. The mechanical splice should withstand 10 000 cycles of alternating tension and compression load when tested by a standard method.

 

Additional Information:

• Item Code: SERC01
• Production Capacity: 10000000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

TMT Rebar Coupler couplers are used as joint for the continuity of TMT bars The coupler gives extensive strength to the structures.
One of our reputed products, Threaded Rebar Coupler is made up of high-density carbon-steel that allows it to bear immense weight under various pressure conditions.

Features:Fine finishingMinimum maintenanceHigh efficiencyLonger lifeEasy to useEasy to operateRuggednessHIGH CARBON STEEL

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

High cycle fatigue test

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SETRC1
• Production Capacity: 100000
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Goni

Rebar Coupler is mechanical joint system used in Construction field to join two Rebar at the place of lapping system.

Features:

High strength

High Production Ratio

Less labour required to perform task

High Quality
We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

High cycle fatigue test

 

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SE43
• Production Capacity: 10000
• Delivery Time: 1 day
• Packaging Details: Rebar Coupler

We are dedicatedly engaged in manufacturing, supplying and trading optimum quality Rebar Coupler. The experts working with us make sure that excellent quality material is used in the production process. Besides, we make sure that the consignments are timely delivered at customers' destinations.

Standard Sizes:

16 mm Rebar Coupler

20 mm Rebar Coupler

25 mm Rebar Coupler

32 mm Rebar Coupler

Features

- Fine finish

- Rust resistant

- Dimensionally accurate

We are providing sales & services in all over pan india Mumbai, goa, rajasthan, jaipur, rajkot, surat, ahmedabad, vadodara, vapi, kolkata, karnataka, chennai, tamil nadu, kerla, nashik, pune, kolhapur, satara, hyderabad, aurangabad, bangalore, mangalore, delhi kota, indore kota

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Cyclic Tensile Test

 

The mechanical splice is reliable when it can withstand 100 cycles of stress variation. The cycle is from 5 percent to 90 percent of fy (where fy = 550 N/mm2) when tested by standard details. It is to be done without loss of static tensile strength capacity when compared with a similar specimen. The static tensile strength capacity of the sample is determined by testing it statically. It undergoes numerous stress cycles for failure of the required procedure. At the end of the test, the spliced sample shall remain intact.

Additional Information:

• Item Code: SERC32
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: TMT Bar Coupler with pack of 25 pieces

We are a leading manufacturer and supplier of grouted couplers. Groutec Coupler is a mechanical splicing designed for the connection of precast elements.
Groutec Coupler One side of this Coupler is threaded to connect the reinforcement bar and the other side is connected with slab by precast at site. Groutec coupler is a one-sided threaded mechanical splicing coupler.
Grouted is manufactured in compliance with BS 8110, IBC, AASHTO, Euro-code 2, and ACI 318.
It is specially designed for precast concrete slabs. In a grouted coupler, one end receives threaded rebar and the opposite end provides the flexibility of the grout system.Groutec Coupler Varies in Different Sizes like 12mm, 16mm, 20mm, 25mm, 32mm and 40mm.
We have grouted coupler dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

Additional Information:

• Item Code: SERGC06
• Production Capacity: 50000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

Surya Engineering is a manufacturer of Rebar Couplers which are use to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Rebar Couplers are readily available for any rebar diameter ranging from 16 mm to 40mm. Surya Engineering can customize our products to meet your specific requirement.

High cycle fatigue test

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SERC1
• Production Capacity: 1000000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

We are a leading manufacturer and supplier of grouted couplers. Groutec Coupler is a mechanical splicing designed for the connection of precast elements.
Groutec Coupler One side of this Coupler is threaded to connect the reinforcement bar and the other side is connected with slab by precast at site. Groutec coupler is a one-sided threaded mechanical splicing coupler.
Grouted is manufactured in compliance with BS 8110, IBC, AASHTO, Euro-code 2, and ACI 318.
It is specially designed for precast concrete slabs. In a grouted coupler, one end receives threaded rebar and the opposite end provides the flexibility of the grout system.Groutec Coupler Varies in Different Sizes like 12mm, 16mm, 20mm, 25mm, 32mm and 40mm.
We have grouted coupler dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

High cycle fatigue test

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SERGC02
• Production Capacity: 100000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in 2 Days

We are a leading manufacturer and supplier of grouted couplers. Groutec Coupler is a mechanical splicing designed for the connection of precast elements.
Groutec Coupler One side of this Coupler is threaded to connect the reinforcement bar and the other side is connected with slab by precast at site. Groutec coupler is a one-sided threaded mechanical splicing coupler.
Grouted is manufactured in compliance with BS 8110, IBC, AASHTO, Euro-code 2, and ACI 318.
It is specially designed for precast concrete slabs. In a grouted coupler, one end receives threaded rebar and the opposite end provides the flexibility of the grout system.Groutec Coupler Varies in Different Sizes like 12mm, 16mm, 20mm, 25mm, 32mm and 40mm.
We have grouted coupler dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

High cycle fatigue test

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SERGC04
• Production Capacity: 10000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

A rebar coupler is a mechanical device used in construction to connect two pieces of reinforcing steel bars (rebar) together. These couplers are typically used when the length of rebar needed for a construction project exceeds the standard available lengths or when there is a need to join two rebars for other reasons such as seismic considerations or to simplify construction.
Here are some key points about rebar couplers in construction:
Purpose: Rebar couplers are used to create a continuous, unbroken length of reinforcement within a concrete structure. This is important for structural integrity and strength, as it ensures that there are no weak points in the rebar where it is spliced together.
Types: There are various types of rebar couplers, including threaded couplers, tapered thread couplers, and mechanical couplers. The choice of coupler depends on the project's requirements and local building codes.
Installation: Rebar couplers are installed by threading or mechanically connecting the ends of the two rebar pieces together. This process is typically done using special equipment or tools to ensure a secure connection.
Advantages:
Strength: Properly installed couplers can provide a connection as strong as the rebar itself.Reduced Labor: Using couplers can reduce the amount of labor required for manually tying rebar, saving time and money.Consistency: Couplers provide consistent and reliable connections, reducing the risk of human error in tying rebar.Applications: Rebar couplers are commonly used in various construction projects, including high-rise buildings, bridges, dams, and other infrastructure projects where reinforced concrete is used.
Codes and Standards: The use of rebar couplers is subject to local building codes and standards. It's essential to follow these regulations to ensure the safety and structural integrity of the project.
Quality Control: Proper quality control and inspection are critical when using rebar couplers. Inspections should ensure that the couplers are correctly installed, and the rebar is properly aligned and threaded.
This rebar couplers are essential components in modern construction, allowing for the efficient and reliable connection of reinforcing steel bars. Their use can enhance the structural integrity of concrete structures while also improving construction efficiency. However, it's crucial to adhere to local building codes and industry standards when using rebar couplers to ensure safety and compliance.



Surya Engineering is one of the leading Manufacturer and Exporter of Rebar Coupler Bar Cap Forging Machine PVC Block etc We offer these products at most reasonable rates In their development process we assure that only top notch basic material is used by our professionals along with ultra modern tools and machinery Together with this our offered facility of customization has earned us a huge number of satisfied customers

 

Low cycle fatigue test

 

There are two types of fatigue tests namely low cycle fatigue test and high cycle fatigue test. All reinforcement couplers should be able to satisfy the requirement for low cycle fatigue tests. The mechanical splice should withstand 10 000 cycles of alternating tension and compression load when tested by a standard method.

Additional Information:

• Item Code: SERC02
• Production Capacity: 10000000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

MBT couplers require neither bar end preparation to form threads nor bar rotation to effect installation. The bars are supported within the coupler by two serrated saddles.(Sizes 10, 12, 16, 20, 25, 32, 40)DIBt Approval No. Z-1.5-10.(Sizes ET10, 12, 14, 16, 20, 25 and 28)
MBT couplers have been tested to show compliance with the following design codes: BS EN 1992-1-1: 2004 (Eurocode 2), BS 5400, BS 8110, BS 8597, ACI 318, and DIN 1045 German Code.
Not all coupler types and sizes are relevant to the national approvals shown. For details of coupler types and sizes relevant to each national approval please refer to the relevant approval document, which is available on request.
ET series couplers are used to connect reinforcing bars of the same diameter. They can be used when neither bar can be rotated and are available in sizes 10mm to 40mm.

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

 

 

 

Additional Information:

• Item Code: SEMBTC1
• Production Capacity: 2000
• Delivery Time: Within 2 Days
• Packaging Details: Packed In Goni

Parallel Rebar Coupler:

Parallel and taper rebar Couplers are good in strength for multi stories buildings malls and dams.

We are providing sales & services in all over pan india Mumbai, rajasthan, jaipur, kolhapur, nashik, pune, satara, nagpur, coimbatore, karnataka, chennai, tamil nadu, kerla, surat, ahmedabad, hariyana, ludhiana, bangalore, mangalore, vadodara, vapi

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Low cycle fatigue test

 

 

There are two types of fatigue tests namely low cycle fatigue test and high cycle fatigue test. All reinforcement couplers should be able to satisfy the requirement for low cycle fatigue tests. The mechanical splice should withstand 10 000 cycles of alternating tension and compression load when tested by a standard method.

Additional Information:

• Item Code: SE13
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: Parallel Rebar Coupler with pack 25 pieces

Surya Engineering is one of the leading Manufacturer and Exporter of Rebar Coupler Bar Cap Forging Machine PVC Block etc We offer these products at most reasonable rates In their development process we assure that only top notch basic material is used by our professionals along with ultra modern tools and machinery Together with this our offered facility of customization has earned us a huge number of satisfied customers

Cyclic Tensile Test

The mechanical splice is reliable when it can withstand 100 cycles of stress variation. The cycle is from 5 percent to 90 percent of fy (where fy = 550 N/mm2) when tested by standard details. It is to be done without loss of static tensile strength capacity when compared with a similar specimen. The static tensile strength capacity of the sample is determined by testing it statically. It undergoes numerous stress cycles for failure of the required procedure. At the end of the test, the spliced sample shall remain intact.

Additional Information:

• Item Code: SEMRC04
• Production Capacity: 100000
• Delivery Time: WITHIN 2 DAYS
• Packaging Details: Packed in Gunny Bag

Surya Engineering is a manufacturer of Rebar Couplers which are use to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Rebar Couplers are readily available for any rebar diameter ranging from 16 mm to 40mm. Surya Engineering can customize our products to meet your specific requirement.

 

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

 

Additional Information:

• Item Code: SERC11
• Production Capacity: 100000
• Delivery Time: WITH IN 3 DAYS
• Packaging Details: Packed in Gunny Bag

Surya Engineering is a manufacturer of Rebar Couplers which are use to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Rebar Couplers are readily available for any rebar diameter ranging from 16 mm to 40mm. Surya Engineering can customize our products to meet your specific requirement.

Low cycle fatigue test

 

There are two types of fatigue tests namely low cycle fatigue test and high cycle fatigue test. All reinforcement couplers should be able to satisfy the requirement for low cycle fatigue tests. The mechanical splice should withstand 10 000 cycles of alternating tension and compression load when tested by a standard method.

 

Additional Information:

• Item Code: SERC24
• Production Capacity: 11000
• Delivery Time: WITH IN 3 DAYS
• Packaging Details: Packed in Gunny Bag

Surya Engineering is a manufacturer of Rebar Couplers which are use to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Rebar Couplers are readily available for any rebar diameter ranging from 16 mm to 40mm. Surya Engineering can customize our products to meet your specific requirement.

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

Additional Information:

• Item Code: SERC245
• Production Capacity: 10010
• Delivery Time: WITH IN 2 DAYS
• Packaging Details: Packed in Gunny Bag

Surya Engineering is a manufacturer of Rebar Couplers which are use to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Rebar Couplers are readily available for any rebar diameter ranging from 16 mm to 40mm. Surya Engineering can customize our products to meet your specific requirement.

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

Additional Information:

• Item Code: SERC325
• Production Capacity: 10000
• Delivery Time: WITH IN 2 DAYS
• Packaging Details: Packed in Gunny Bag

We are a leading manufacturer and supplier of grouted couplers. Groutec Coupler is a mechanical splicing designed for the connection of precast elements.
Groutec Coupler One side of this Coupler is threaded to connect the reinforcement bar and the other side is connected with slab by precast at site. Groutec coupler is a one-sided threaded mechanical splicing coupler.
Grouted is manufactured in compliance with BS 8110, IBC, AASHTO, Euro-code 2, and ACI 318.
It is specially designed for precast concrete slabs. In a grouted coupler, one end receives threaded rebar and the opposite end provides the flexibility of the grout system.Groutec Coupler Varies in Different Sizes like 12mm, 16mm, 20mm, 25mm, 32mm and 40mm.
We have grouted coupler dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

Additional Information:

• Item Code: SERGC05
• Production Capacity: 50000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

Surya Engineering is a manufacturer of Rebar Couplers which are use to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Rebar Couplers are readily available for any rebar diameter ranging from 16 mm to 40mm. Surya Engineering can customize our products to meet your specific requirement.

Cyclic Tensile Test

The mechanical splice is reliable when it can withstand 100 cycles of stress variation. The cycle is from 5 percent to 90 percent of fy (where fy = 550 N/mm2) when tested by standard details. It is to be done without loss of static tensile strength capacity when compared with a similar specimen. The static tensile strength capacity of the sample is determined by testing it statically. It undergoes numerous stress cycles for failure of the required procedure. At the end of the test, the spliced sample shall remain intact.

 

Additional Information:

• Item Code: SERC248
• Production Capacity: 10000
• Delivery Time: WITH IN 2 DAYS
• Packaging Details: Packed in Gunny Bag

We are dedicatedly engaged in manufacturing, supplying and trading optimum quality Rebar Coupler. The experts working with us make sure that excellent quality material is used in the production process. Besides, we make sure that the consignments are timely delivered at customers' destinations.

Standard Sizes:

16 mm Rebar Coupler

20 mm Rebar Coupler

25 mm Rebar Coupler

32 mm Rebar Coupler

Features

- Fine finish

- Rust resistant

- Dimensionally accurate

We are providing sales & services in all over pan india Mumbai, goa, rajasthan, jaipur, rajkot, surat, ahmedabad, vadodara, vapi, kolkata, karnataka, chennai, tamil nadu, kerla, nashik, pune, kolhapur, satara, hyderabad, aurangabad, bangalore, mangalore, delhi kota, indore kota

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

Cyclic Tensile Test

 

The mechanical splice is reliable when it can withstand 100 cycles of stress variation. The cycle is from 5 percent to 90 percent of fy (where fy = 550 N/mm2) when tested by standard details. It is to be done without loss of static tensile strength capacity when compared with a similar specimen. The static tensile strength capacity of the sample is determined by testing it statically. It undergoes numerous stress cycles for failure of the required procedure. At the end of the test, the spliced sample shall remain intact.

Additional Information:

• Item Code: secr24
• Production Capacity: 10000000
• Delivery Time: WITHIN 3 DAYS
• Packaging Details: BOX

A SURYA Terminator Coupler is a specialized mechanical device used in construction to replace traditional hooked rebar anchorage, offering a more efficient and congestion-reducing solution in reinforced concrete structures. Below is a detailed description of its features, benefits, and applications:

1. Definition and Purpose

A SURYA Terminator Coupler is an oversized half-coupler or assembly secured to the end of a reinforcing bar (rebar) to create a mechanical anchorage within concrete. It eliminates the need for bent or hooked rebars, which are often difficult to install in congested reinforcement zones like beam-column joints, pile caps, or anchorage areas .

2. Key Features

• Material: Typically made from high-strength carbon steel ( carbon steel or 40Cr alloy) 

• Design: Engineered to bear full tension loads, exceeding 125% of the rebar’s specified yield strength ( G460 per BS4449 standards) 

• Installation: Field-installed without specialized equipment, often using cold-swaging or threading techniques for a secure grip 

• Compatibility: Works with threading systems like JoinTec or CNC parallel threading for precision 

3. Advantages Over Hooked Rebars

• Reduces Congestion: Simplifies placement in densely reinforced areas, improving concrete flow and compaction 

• Time and Cost Savings: Eliminates the labor-intensive bending of rebars and allows prefabrication, shortening construction timelines 

• Performance: Achieves higher tensile strength (up to 600 MPa) and passes fatigue tests (2 million cycles) 

• Versatility: Suitable for applications like beam-column connections, pile cages, and roof column ties 

4. Applications

• Structural Joints: Beam-to-column connections, knee joints, and pile caps 

• Retrofitting: Facilitates future expansions without increasing embedded component sizes 

• Heavy Congestion Zones: Ideal where bent bars are impractical due to space constraints

Additional Information:

• Item Code: TERMI5456
• Production Capacity: 10000000
• Delivery Time: WITHIN 3 DAYS
• Packaging Details: GUNNY

A SURYA Terminator Coupler is a specialized mechanical device used in construction to replace traditional hooked rebar anchorage, offering a more efficient and congestion-reducing solution in reinforced concrete structures. Below is a detailed description of its features, benefits, and applications:

1. Definition and Purpose

A SURYA Terminator Coupler is an oversized half-coupler or assembly secured to the end of a reinforcing bar (rebar) to create a mechanical anchorage within concrete. It eliminates the need for bent or hooked rebars, which are often difficult to install in congested reinforcement zones like beam-column joints, pile caps, or anchorage areas .

2. Key Features

• Material: Typically made from high-strength carbon steel ( carbon steel or 40Cr alloy) 

• Design: Engineered to bear full tension loads, exceeding 125% of the rebar’s specified yield strength ( G460 per BS4449 standards) 

• Installation: Field-installed without specialized equipment, often using cold-swaging or threading techniques for a secure grip 

• Compatibility: Works with threading systems like JoinTec or CNC parallel threading for precision 

3. Advantages Over Hooked Rebars

• Reduces Congestion: Simplifies placement in densely reinforced areas, improving concrete flow and compaction 

• Time and Cost Savings: Eliminates the labor-intensive bending of rebars and allows prefabrication, shortening construction timelines 

• Performance: Achieves higher tensile strength (up to 600 MPa) and passes fatigue tests (2 million cycles) 

• Versatility: Suitable for applications like beam-column connections, pile cages, and roof column ties 

4. Applications

• Structural Joints: Beam-to-column connections, knee joints, and pile caps 

• Retrofitting: Facilitates future expansions without increasing embedded component sizes 

• Heavy Congestion Zones: Ideal where bent bars are impractical due to space constraints

Additional Information:

• Item Code: TERMI1385
• Production Capacity: 100000
• Delivery Time: WITHIN 30 DAYS
• Packaging Details: GUNNY

 Product – Surya Rebar Coupler

✅ BIS Certified (IS 16172) | ISO 9001:2015
✅ Sizes: 12mm – 40mm Rebars
✅ Material: High-Tensile Steel, Hot-Dip Galvanized
✅ Applications: High-Rises, Bridges, Tunnels, Industrial Structures

🌆 We Serve All Major Cities Across India:

📍 North India:
Delhi, Noida, Gurugram, Faridabad, Ghaziabad, Chandigarh, Ludhiana, Jaipur, Lucknow, Kanpur, Dehradun

📍 West India:
Mumbai, Pune, Ahmedabad, Surat, Vadodara, Nagpur, Nashik, Indore, Bhopal

📍 South India:
Bengaluru, Hyderabad, Chennai, Coimbatore, Kochi, Visakhapatnam, Vijayawada, Mysuru, Madurai

📍 East India:
Kolkata, Bhubaneswar, Patna, Ranchi, Guwahati, Jamshedpur

#SuryaEngineering #RebarCoupler #ConstructionMaterials #BuildingIndia #CivilEngineering #InfrastructureDevelopment

A rebar coupler (or mechanical splice) is a device used to connect two reinforcing steel bars end-to-end. It provides a continuous load path, effectively making two separate bars perform as a single, longer piece of rebar. This method has largely replaced the traditional technique of lapping bars, where they would overlap for a certain distance.

Additional Information:

• Production Capacity: 1450

It is aThreaded connection steel rebar coupler which guaranty an ultimate tensile strength of the joint (Splice) slightly greater than that of the parent bar. Each of the connection constitutes, one sleeve that connects two bars, the ends of these which are threaded using machines.

Standard Sizes: Rebar Coupler

16 mm Rebar Coupler

20 mm Rebar Coupler

25 mm Rebar Coupler

32 mm Rebar Coupler

40 mm Rebar Coupler

We are providing sales & services in all over pan india Mumbai, goa, rajasthan, rajkot, jaipur, kolkata, chennai, tamil nadu, kerla, vishakhapatnam, hyderabad, aurangabad, surat, ahmedabad, vadodara, vapi, nashik, pune, kolhapur, satara, coimbatore, bangalore, mangalore, delhi kora, indore kota, hariyana, ludhiana

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.

High cycle fatigue test

 

 

High cycle fatigue testing is typically conducted on specimens in load/stress control to develop Stress-Life (S-N) Curves.  An S-N Curve is generated by testing samples at a constant load/stress and recording the number of cycles to failure.  The data is then compiled and a best trend fit is applied.  This establishes a relationship between a particular load/stress level and the fatigue life of the material. 

Additional Information:

• Item Code: SE40
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 100000
• Delivery Time: 1 week
• Packaging Details: Rebar coupler with pack of 25 pieces

Cold extrusion press system is a kind of flexible connection designed according to construction site. It is an easy operated method to connect rebar, no need to precast rebar in factory.
 
The cold extrusion press coupler is extruded on rebar ends with the pressure of high pressure device. The test result of this kind of connection can guarantee the tensile strength of connection specimen is no less than 125% of the normal yield strength of rebar. (rebar grade: 500MPa)
 
Cold extrusion press system is butt-to-butt connection which is suitable for applications that have both tension and compression requirements.

Advantages:
1. Suitable for repair or reform projects
2. Suitable for any rebar ends which are cold cut
3. No reducing the cross section area of rebar
4. All couplers have individual marks and batch numbers, so it is easy to trace raw materials. Totally produced in accordance with ISO 9001 standard.

Rebar Cold Hydraulic Press Coupling Installation Guide
1. Site preparation work: clean and straighten rebar.
2. Mark on rebar half length of the coupler.
3. Put the coupler in the gauge length to limit the extrusion area, and then mark on both ends of cold extrusion press coupler.
4. We can’t extrude coupler outside the marking area after marking. We should extrude the coupler from middle to both sides.
5. Prepare hydraulic tools and install the corresponding pressure moulds. Prepare pump to connect power. If the motor is 380V or 440V, please rotate the switch to correct motor first.
6. Insert half length of the coupler onto rebar, connect according to indicating mark.
7. Extrude coupler with required pressure.
8. Stop extruding when it reaches the pressure value of specified size.
9. The process above is repeated many times according to each size requirements.
10. Prepare as many rebar end as need to connect.
11. Insert the rebar need to connect into the coupler extruded on the first rebar.
12. Repeat the extrusion process on the connecting rebar.

The strength of cold extrusion press connection is no less than rebar normal strength in tensile tests. It can also do the ultimate mechanical tests which can break on bar outside the connection according to client’s requests.
Surya Engineering is one of the leading Manufacturer and Exporter of Rebar Coupler Bar Cap Forging Machine PVC Block etc We offer these products at most reasonable rates In their development process we assure that only top notch basic material is used by our professionals along with ultra modern tools and machinery Together with this our offered facility of customization has earned us a huge number of satisfied customers

Low cycle fatigue test

 

There are two types of fatigue tests namely low cycle fatigue test and high cycle fatigue test. All reinforcement couplers should be able to satisfy the requirement for low cycle fatigue tests. The mechanical splice should withstand 10 000 cycles of alternating tension and compression load when tested by a standard method.

Additional Information:

• Item Code: SECC01
• Production Capacity: 100000
• Delivery Time: Within 2 Days
• Packaging Details: Packed in Gunny Bag

Landis threading dies are precision tools designed for cutting and rolling threads on pipes, bolts, and other cylindrical workpieces. They are known for their durability, high performance, and ability to handle a wide range of thread types, including UN, BSF, Whitworth,  and  threads Landis dies are used in industries such as , construction, and manufacturing.

• Designed for applications where the workpiece rotates and the die remains stationary.

• Capable of threading #4 to 6-1/2" (3mm to 165mm) straight threads and 1/8" to 4" tapered pipe threads.

• Compatibility: Works with Landis threading machines and other major brands

•  

  • Bolt and Fastener Production: High-volume threading for industrial fasteners.

Additional Information:

• Production Capacity: 10
• Delivery Time: within 3 days
• Packaging Details: box

Gas Pressure Welding of Rebars – Solid & Efficient Reinforcement Joining

Gas Pressure Welding (GPW) is a solid-state welding process used to join steel reinforcement bars (rebars) without filler material. It uses oxy-fuel gas flames to heat the rebar ends to a plastic state (around 1,200°C), followed by axial pressure to forge the bars together. The result is a high-strength, homogeneous joint with properties similar to the parent metal.

⚙️ Process Steps

1. Preparation: Rebar ends cut square and cleaned.

2. Clamping: Aligned and clamped in a welding machine.

3. Heating: Oxygen + fuel gas (acetylene/LPG) flames heat ends uniformly.

4. Upsetting: Axial pressure (150–350 MPa) applied, forming an upset collar.

5. Cooling: Slow cooling prevents brittleness.

✅ Advantages

• Full Strength Joint: No strength reduction (unlike lap splicing).

• No Filler Material: Reduces cost & avoids compatibility issues.

• Visual Inspection Possible: Joint quality can be checked visually.

• Fast & Economical: Suitable for mass production (e.g., precast yards).

• Smooth Finish: Minimal surface deformation after collar trimming.

Surya Engineering is a manufacturer of Rebar Couplers which are use to join the reinforcement bars end to end. Couplers are an efficient alternative for traditional lap splice or overlapping joints. Cost benefit analysis show that use of threaded rebar couplers is a cost effective method as compared to old method of lap splicing / overlapping joints.
Rebar Couplers are readily available for any rebar diameter ranging from 16 mm to 40mm. Surya Engineering can customize our products to meet your specific requirement.

Slip Test

 

The total slip value measured by the test procedure should not exceed 0.10 mm.

1. Gujarat's Industrial Strength: Supporting Gujarat's industrial and infrastructure boom. Our rebar couplers (16mm to 32mm) offer reliable, labor-saving splicing for factories and ports.

Additional Information:

• Item Code: SERC326
• Production Capacity: 100000
• Delivery Time: WITH IN 2 DAYS
• Packaging Details: Packed in Gunny Bag